Before the problem I've tryed to make boot loader upgrade to make 64Mb flash card readable.Now there is a boot loader on the RP bootflash, and nothing on the SP bootflash. I want to know how can i copy the ios c6sup22 from my computer to the SP bootflash? The outputs are
System Bootstrap, Version 7.1(1)
Copyright (c) 1994-2001 by cisco Systems, Inc.
c6k_sup2 processor with 131072 Kbytes of main memory
Autoboot executing command: "boot bootflash:"
boot: cannot determine first file name on device "bootflash:"
Exit at the end of BOOT string
rommon 1 > dir bootflash:
File size Checksum File name
rommon 2 > dir slot0:
File size Checksum File name
6238236 bytes (0x5f301c) 0xc3d90a08 cat6000-sup2k8.7-4-3.bin
1673992 bytes (0x198b08) 0x997d2076 c6msfc2-boot-mz.121-7.E
rommon 3 >boot slot0:cat6000-sup2k8.7-4-3.bin
........
Console> (enable) show version
WS-C6509 Software, Version NmpSW: 7.4(3)
Copyright (c) 1995-2002 by Cisco Systems
NMP S/W compiled on Nov 27 2002, 18:27:42
System Bootstrap Version: 7.1(1)
Hardware Version: 3.0 Model: WS-C6509 Serial #: TBA05392260
PS2 Module: WS-CAC-1300W Serial #: SNI05110357
Mod Port Model Serial # Versions
--- ---- ------------------- ----------- --------------------------------------
1 2 WS-X6K-SUP2-2GE SAD053803VS Hw : 3.2
Fw : 7.1(1)
Fw1: 6.1(3)
Sw : 7.4(3)
Sw1: 7.4(3)
WS-F6K-PFC2 SAD053802BA Hw : 2.0
3 16 WS-X6416-GBIC SAL0537BMR6 Hw : 1.0
Fw : 5.4(2)
Sw : 7.4(3)
5 48 WS-X6148-RJ45V SAL082802KR Hw : 3.1
Fw : 5.4(2)
Sw : 7.4(3)
Hw : 2.0
DRAM FLASH NVRAM
Module Total Used Free Total Used Free Total Used Free
------ ------- ------- ------- ------- ------- ------- ----- ----- -----
1 131072K 59038K 72034K 32768K 1537K 31231K 512K 257K 255K
Uptime is 0 day, 0 hour, 1 minute
Console> (enable)
Console> (enable) swi console
Trying Router-15...
Connected to Router-15.
Type ^C^C^C to switch back...
rommon 1 > dir bootflash:
File size Checksum File name
1734148 bytes (0x1a7604) 0x8d01e5b1 c6msfc2-boot-mz.121-11b.E4.bin
10178832 bytes (0x9b5110) 0x8f01f314 c6msfc2-psv-mz.121-7a.E1
1673992 bytes (0x198b08) 0x997d2076 c6msfc2-boot-mz.121-7.E
rommon 2>boot bootflash:c6msfc2-boot-mz.121-11b.E4.bin
...........
Router(boot)#show version
Cisco Internetwork Operating System Software
IOS (tm) MSFC2 Software (C6MSFC2-BOOT-M), Version 12.1(11b)E4, EARLY DEPLOYMENT
RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Thu 30-May-02 18:43 by hqluong
Image text-base: 0x40008980, data-base: 0x40404000
ROM: System Bootstrap, Version 12.1(3r)E2, RELEASE SOFTWARE (fc1)
BOOTLDR: MSFC2 Software (C6MSFC2-BOOT-M), Version 12.1(11b)E4, EARLY DEPLOYMENT
RELEASE SOFTWARE (fc1)
Router uptime is 6 minutes
System returned to ROM by power-on
System image file is "bootflash:c6msfc2-boot-mz.121-11b.E4.bin"
cisco Cat6k-MSFC2 (R7000) processor with 114688K/16384K bytes of memory.
Processor board ID SAD053801A9
R7000 CPU at 300Mhz, Implementation 39, Rev 2.1, 256KB L2, 1024KB L3 Cache
Last reset from power-on
X.25 software, Version 3.0.0.
509K bytes of non-volatile configuration memory.
16384K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x100
Router(boot)#sho running-config
Building configuration...
Current configuration : 217 bytes
!
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Router
!
!
ip subnet-zero
!
!
!
no ip http server
!
line con 0
line vty 0 4
!
end
When i'm booting the c6msfc2-boot-mz.121-11b.E4.bin image i can't see the modules. I cant configure an IP address on the interface to use tftp to download c6sup22 image on a bootflash:
Thanks!
