08-29-2012 07:20 AM - edited 03-07-2019 08:35 AM
Hi All,
whats the minimal cost switch that supports intervlan routing and is manageable.
eg:WS-C2960-24TC-S or WS-C2960-8TC-L
08-29-2012 06:05 PM
Hi,
This switch is a pure L2 which will not support intervlan routing but this is managebale.
I suggest u look for 3560 Series which will support intervlan routing.
Thanks
08-29-2012 10:13 PM
Hi Anand ,
Intervlan supports only on Layer 3 switches or on router.
Like:
Layer-3-Switches (Catalyst 4500/4500-E, Catalyst 3560/3560-E or Catalyst 3750/3750-E Series)
Regards
Please rate if it helps.
08-30-2012 05:48 AM
You can use 12 port 3750 or 3560. With ipbase iOS image . That will support interval routing. That is the cheapest layer enterprise of Cisco
Sent from Cisco Technical Support iPad App
08-30-2012 05:52 AM
Also you could buy a used Cisco 3550 which will do Layer 3 and come out very cheap with this device. But if money is an issue at this moment try to use packet tracer because it will also do the job for you until you are able to get a L3 Device.
Hope this helps
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide