cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
513
Views
0
Helpful
2
Replies

Level 15 console login with tacacs server on Cisco 2960

Nuno Moreira
Level 1
Level 1

Hi...

I have C2960 switch with SW Version 12.2(55)SE3, SW Image C2960-LANBASEK9-M.

AAA configuration is working fine when I login wth ssh, but when I login through console, I always have to use the enable password.

 

configuration in AAA

aaa authentication login default group tacacs+ local
aaa authorization exec default group tacacs+ local

 

Thank You

1 Accepted Solution

Accepted Solutions

adammcleish
Level 1
Level 1

By default, the aaa configs don't apply to the console configs.

If I remember, putting:

aaa authorization console

into the config will enable this for you.

Let me know.

View solution in original post

2 Replies 2

adammcleish
Level 1
Level 1

By default, the aaa configs don't apply to the console configs.

If I remember, putting:

aaa authorization console

into the config will enable this for you.

Let me know.

Nuno Moreira
Level 1
Level 1

Thank you adam.

Review Cisco Networking for a $25 gift card