License installation on 2 different stack 3750-X

[Pierluigi Torriani]

   Hi,

i need support about the steps for installation of license ipbase from evaluation ipbase on 2 different stacks of 3750-X. the 2 stacks are composed of 2 3750-X with ipbase evaluation and i want to install the ipbase license bought and remove the evaluation. I red the documentation on 

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/white_paper_c11-579326_ps10745_Products_White_Paper.html  but some informations are not clear.

The environment are in production state so i can reload a single switch (not stack but switch) per time and not the single stack. How can i install the license on single switch? If i install the license on flash1 of master switch, and i reload that,after that i try to install the license on member switch flash2  but the switch tells me that the license is already installed and i cant do that. Have anyone met the same problem?

Can someone help me to give the correct steps to do it without reload the single stack?

Remember: i can reload only a single switch per time!

Thanks for any suggestion,

Pierluigi

[Pierluigi Torriani]

   Hi all,

i installed the license on all switches.

All steps are:

1. removed the stack cable on first stack;

2. removed the old license on switch 1;

3. copied and installed the new license;

4. verified that new license was in "permanent" state.

5.removed the old license on switch 2;

6. copied and installed the new license;

7. verified that new license was in "permanent" state.

8. connected the stack cable and waited that switches join the stack.

repeted all steps on second stack.

thanks,

Pierluigi