cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
365
Views
0
Helpful
4
Replies
Highlighted
Beginner

License Question

When I run the sh license command it returns a value "% License not supported on this device".  Does anyone know why?

I'm attaching the results from the sh ver and sh run commands.

This relates to a WS-C3750G-48TS.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Beginner

Hi,

Hi,

For C3750G - license command won't work. 3750 switches support  only specific feature releases like ipbase and ipservices images. So, there is no need for licensing.

BR

Prem

View solution in original post

4 REPLIES 4
Highlighted
Beginner

Hi,

Hi,

For C3750G - license command won't work. 3750 switches support  only specific feature releases like ipbase and ipservices images. So, there is no need for licensing.

BR

Prem

View solution in original post

Highlighted
Cisco Employee

Hi!

Hi!

This is because you cannot active license in this switch. The license is embedded in the .bin image you download from the site.

"Even though the Catalyst 3750 switch does not support software activation, the Catalyst 3750 master in a mixed hardware stack supports the software license administration and management functions."

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750e_3560e/software/release/12-2_40_se/configuration/note/swactivn.html

You can use the show version command to check the license status of the switch as you did in the output.

Hope it helps, best regards!

JC

Beginner

Hi,

Hi,

well, it may clarify your doubts with the below link.

https://supportforums.cisco.com/document/69361/licensing-290035003700

BR

Prem

Highlighted
Beginner

thanks for your reply, but

thanks for your reply, but does this also apply to 3750G, which is the one I have..  The link you sent me is about 3750e.

CreatePlease to create content
Content for Community-Ad