cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4085
Views
0
Helpful
1
Replies

(*) - local vPC is down, forwarding via vPC peer-link

prem.ce24
Level 1
Level 1

Hello 

Local VPC status down what is the issue-----

status - 

 

 show vpc
Legend:
                (*) - local vPC is down, forwarding via vPC peer-link

vPC domain id                     : 1
Peer status                       : peer adjacency formed ok
vPC keep-alive status             : peer is alive
Configuration consistency status  : success
Per-vlan consistency status       : success
Type-2 consistency status         : success
vPC role                          : secondary
Number of vPCs configured         : 2
Peer Gateway                      : Disabled
Dual-active excluded VLANs        : -
Graceful Consistency Check        : Enabled
Auto-recovery status              : Enabled (timeout = 240 seconds)

vPC Peer-link status
---------------------------------------------------------------------
id   Port   Status Active vlans
--   ----   ------ --------------------------------------------------
1    Po1    up     1,150

vPC status
----------------------------------------------------------------------------
id     Port        Status Consistency Reason                     Active vlans
------ ----------- ------ ----------- -------------------------- -----------
10     Po10        down*  success     success                    -
20     Po20        down*  success     success                    -

 

 

# show port-channel summary
Flags:  D - Down        P - Up in port-channel (members)
        I - Individual  H - Hot-standby (LACP only)
        s - Suspended   r - Module-removed
        S - Switched    R - Routed
        U - Up (port-channel)
        M - Not in use. Min-links not met
--------------------------------------------------------------------------------
Group Port-       Type     Protocol  Member Ports
      Channel
--------------------------------------------------------------------------------
1     Po1(SU)     Eth      LACP      Eth1/1(P)    Eth1/2(P)
10    Po10(SD)    Eth      LACP      Eth1/47(I)
20    Po20(SD)    Eth      LACP      Eth1/48(I)
#

1 Reply 1

Reza Sharifi
Hall of Fame
Hall of Fame

Hi,

What is Portchannel 10 and 20 for?  They are both down.

Can you post the config from both switches?

HTH