Log messages: for ETH1/30

[alioune-ndiaye]

Hello Expert

 Could you help me to find out the root cause of the following messages :

# sh port-channel internal event-history errors

5K1

32) Event:E_DEBUG, length:76, at 246359 usecs after Thu Dec  4 06:21:46 2014

    [102] pcm_generate_new_ascii(2139): errlist equals pss_nokey, return from fn

33) Event:E_DEBUG, length:132, at 748707 usecs after Thu Dec  4 06:19:27 2014

    [102] pcm_eth_port_ac_link_down_eval_fop_change(2583): Eval and change FOP for pinfo 16000031 mbr 1a01d000 old_fop 1a01d000 new_fop 0

34) Event:E_DEBUG, length:139, at 138259 usecs after Thu Dec  4 06:19:26 2014

    [102] pcm_eth_port_ac_link_down_eval_fop_change(2583): Eval and change FOP for pinfo 16000031 mbr 1a01c000 old_fop 1a01c000 new_fop 1a01d000

35) Event:E_DEBUG, length:132, at 26284 usecs after Thu Dec  4 06:15:43 2014

    [102] pcm_eth_port_ac_link_down_eval_fop_change(2583): Eval and change FOP for pinfo 16000031 mbr 1a01d000 old_fop 1a01d000 new_fop 0

36) Event:E_DEBUG, length:139, at 786286 usecs after Thu Dec  4 06:15:39 2014

    [102] pcm_eth_port_ac_link_down_eval_fop_change(2583): Eval and change FOP for pinfo 16000031 mbr 1a01c000 old_fop 1a01c000 new_fop 1a01d000

5K2

47) Event:E_DEBUG, length:154, at 397822 usecs after Thu Dec  4 06:08:21 2014

    [102] pcm_eth_port_ac_bundle_member_down_in_error(1528): Event (PCM_PORT_EV_BUNDLE_MEMBER_DOWN) received for Ethernet1/30 at state (PCM_ETH_PORT_ST_ERROR)!

48) Event:E_DEBUG, length:179, at 396558 usecs after Thu Dec  4 06:08:21 2014

    [102] pcm_proc_response(417): Ethernet1/30 (0x1a01d000): Setting response status to 0x402b0001 (linecard programming error) for MTS_OPC_ETHPM_BUNDLE_MEMBER_BRINGUP (61451) response

49) Event:E_DEBUG, length:219, at 395647 usecs after Thu Dec  4 06:08:21 2014

    [102] pcm_lacp_rx_hw_en_resp_rcvd(1296): lacp_rx_hw_enabled failed response for if_idx: Ethernet1/30[0x1a01d000] pc 16000031  fed to seqid[0x3]: err lacp: fsm processed a disruptive event (err_id 0x41320010)[0x41320010]

version 6.0(2)N1(2a)

Question:

Do you think this an hardware issue the port e1/30,SFP is dead?

Or a bug?

thank you for your inputs;

Regards

Alioune

[Reza Sharifi]

Hi,

I recommend you open a ticket with TAC and send them the output so they can help in resolving the issue. Since it is line card programming error, it could be a hardware or software issue.

HTH