09-27-2016 11:37 PM - edited 03-08-2019 07:36 AM
Hi,
Anybody knows what this means?
------
Sep 28 06:02:28.817: vs_virtual_link_command switch virtual link 1
Sep 28 06:02:28.823: vs_virtual_link_command switch virtual link 2
Sep 28 06:04:24.786: vs_virtual_link_command switch virtual link 1
Sep 28 06:04:24.789: vs_virtual_link_command switch virtual link 2
Sep 28 06:04:35.747: vs_virtual_link_command switch virtual link 1
Sep 28 06:04:35.755: vs_virtual_link_command switch virtual link 2
Sep 28 06:04:41.665: vs_virtual_link_command switch virtual link 1
Sep 28 06:04:41.672: vs_virtual_link_command switch virtual link 2
Sep 28 06:04:57.508: vs_virtual_link_command switch virtual link 1
Sep 28 06:04:57.512: vs_virtual_link_command switch virtual link 2
Sep 28 06:07:21.848: vs_virtual_link_command switch virtual link 1
Sep 28 06:07:21.854: vs_virtual_link_command switch virtual link 2
--------
Is it an indication, of the VSS switching active VSL switching, if so why did it do it by itself?
Regards
Michael
09-28-2016 10:44 AM
Hi,
When this happens, can you get the output of "show switch virtual link" a few times and see if the virtual control link switches between the 2 interfaces?
HTH
09-29-2016 04:55 AM
just some generic info:
Chassis Type : WS-C4506-E
WS-X45-SUP8-E 15.1(1r)SG5 03.06.03.E
VSL links 1/1/7,1/1/8 - 2/1/7/,2/1/8
The VSL control link seems to be stable, but it's hard to run the command at the right time, when it's "flapping". Any possible debug? Troubleshooting VSS/VSL is new to me.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide