im having problems with logging in Cisco Catalyst 4506, the device is not logging events such as interfaces states: up/down.
current ios is: cat4000-i9s-mz.122-25.EWA14.bin
im thinking problem is about ios but not sure.
can you tell me some ideas to resolve?
those are configurations about logging in switch:
logging console errors
logging monitor errors
logging history size 100
logging history informational
logging trap warnings
logging source-interface GigabitEthernet3/34
DO you want to see logs when interface(s) goes up/down? Then add the command "logging event link-status" in every interface you want.
thanks for your answer.
it is necessary configure it in each interface? is not enough with general or global configuration?
it is necessary configure it in each interface?
Yes it is.
is not enough with general or global configuration?No it is not.