Logging problem in Catalyst 4506

[operaciones_redes]

Dear friends,

im having problems with logging in Cisco Catalyst 4506, the device is not logging events such as interfaces states: up/down.

current ios is: cat4000-i9s-mz.122-25.EWA14.bin

im thinking problem is about ios but not sure.

can you tell me some ideas to resolve?

those are configurations about logging in switch:

logging console errors
logging monitor errors

logging history size 100

logging history informational
logging trap warnings
logging source-interface GigabitEthernet3/34
logging 130.2.18.114
logging 130.2.18.132
logging 130.2.200.51

[Leo Laohoo]

DO you want to see logs when interface(s) goes up/down?  Then add the command "logging event link-status" in every interface you want.

[operaciones_redes]

hello,

thanks for your answer.

it is necessary configure it in each interface? is not enough with general or global configuration?

[Leo Laohoo]

it is necessary configure it in each interface?

Yes it is.

is not enough with general or global configuration?

No it is not.