05-08-2007 02:39 AM - edited 03-05-2019 03:55 PM
I am looking for a table or something semmed that shows all WIC an interfaces that Cisco 2601 accept.
Can anybody help me?.
Solved! Go to Solution.
05-08-2007 02:50 AM
Hi Carlos,
See if this link helps you with something
http://www.cisco.com/en/US/products/hw/routers/ps259/products_relevant_interfaces_and_modules.html
HTH
Ankur
05-08-2007 02:52 AM
Hi,
I haven't heard about a Cisco 2601, only:
Cisco 2691 Multiservice Platform
Cisco 2651 Multiservice Platform
Cisco 2651XM Multiservice Router
Cisco 2650 Multiservice Platform
Cisco 2650XM Multiservice Router
Cisco 2621 Multiservice Platform
Cisco 2621XM Multiservice Router
Cisco 2620 Multiservice Platform
Cisco 2620XM Multiservice Router
Cisco 2613 Multiservice Platform
Cisco 2612 Multiservice Platform
Cisco 2611 Multiservice Platform
Cisco 2611XM Multiservice Router
Cisco 2610 Multiservice Platform
Cisco 2610XM Multiservice Router
Anyway here you are all the Relevant Interfaces and Modules for the 2600 series:
http://www.cisco.com/en/US/products/hw/routers/ps259/products_relevant_interfaces_and_modules.html
HTH, please do rate all helpful replies,
Mohammed Mahmoud.
05-08-2007 02:50 AM
Hi
This would be a good place to start. Attached is a link to all relevant modules/interfaces for the 2600 routers.
http://www.cisco.com/en/US/products/hw/routers/ps259/products_relevant_interfaces_and_modules.html
HTH
Jon
05-08-2007 02:50 AM
Hi Carlos,
See if this link helps you with something
http://www.cisco.com/en/US/products/hw/routers/ps259/products_relevant_interfaces_and_modules.html
HTH
Ankur
05-08-2007 02:52 AM
Hi,
I haven't heard about a Cisco 2601, only:
Cisco 2691 Multiservice Platform
Cisco 2651 Multiservice Platform
Cisco 2651XM Multiservice Router
Cisco 2650 Multiservice Platform
Cisco 2650XM Multiservice Router
Cisco 2621 Multiservice Platform
Cisco 2621XM Multiservice Router
Cisco 2620 Multiservice Platform
Cisco 2620XM Multiservice Router
Cisco 2613 Multiservice Platform
Cisco 2612 Multiservice Platform
Cisco 2611 Multiservice Platform
Cisco 2611XM Multiservice Router
Cisco 2610 Multiservice Platform
Cisco 2610XM Multiservice Router
Anyway here you are all the Relevant Interfaces and Modules for the 2600 series:
http://www.cisco.com/en/US/products/hw/routers/ps259/products_relevant_interfaces_and_modules.html
HTH, please do rate all helpful replies,
Mohammed Mahmoud.
05-08-2007 03:14 AM
?? :-)
05-08-2007 03:36 AM
I had a mistake it is 2610 router.
05-08-2007 03:41 AM
To whoever rated my last post as 1.
I was simply bemused as to why when i posted the same link as Ankur and Mohammed i wasn't rated and they were.
I'm not really bothered that i didn't get a rating, hence the smiley and the fact that in all my posts i do not ask for ratings. I post to help others as many on this forum do but i am a bit miffed about this rating.
Oh well never mind !!
Jon
05-08-2007 03:59 AM
Hi Jon,
Its either whom did this didn't understand the meaning of "1" (which means not helpful by the way everybody), or he did it intentionally (he is sick doing this), any way you deserved the 5 just as us :)
Its always about helping people, and getting experience, and i am glad to interact with an expert like your self.
Please don't bother your self :)
BR,
Mohammed Mahmoud.
05-08-2007 04:22 AM
Hi Mohammed
Many thanks for your kind words. They are very much appreciated and i'm more than happy to return the rating.
And i'm learning a lot from you as well.
Jon
05-08-2007 05:01 AM
I rated your post with '1' because it is what it deserve.
05-08-2007 05:31 AM
Hi Carlos,
I think there is some kind of misunderstanding here, in this forum any one who is trying to help should be appreciated, and i don't think that Jon deserves a "1" (not helpful) as all that he've tried to do is to help you, and he has sent you a useful url as the two of us did, so in any way he should deserve to be rated not helpful.
Any way, take care and have fun, and i do hope that you get the message.
BR,
Mohammed Mahmoud.
05-08-2007 06:09 AM
Hi Carlos,
I am not sure what was the reason you decided to rate the post as "1". As me and Jon I believe posted the URL at a same time and exactly same URL.
It really matters a lot when you rate people here. No one here truely get anything answering number of questions everyday, its just to share experience and knowledgebase which one has and you will really find Jon helping so many people here and with his knowledgebase and experience.
When you rate someone it's like showing an appreciation for someone. When someone on this forum take time out of their regular working hours and schedule I believe he expects nothing much but just few ratings.
Never mind, don't take it on heart it is just what I think.
Regards,
Ankur
05-08-2007 10:24 PM
Ankur
Many thanks for your comments. Much appreciated.
Jon
05-08-2007 06:26 AM
Jon,
I've seen some great posts you have made on this site helping others. It's a shame when some of these engineers do not recognize how much value you bring when answering your questions and disrespect the entire community by rating low (or more commonly, not rating at all).
So... Keep up the great responses!
05-08-2007 10:25 PM
Andrew
As with Ankur, your comments are much appreciated.
Thanks
Jon
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: