08-29-2007 12:09 AM - edited 03-05-2019 06:09 PM
how to deny specfic mac address to access specfic server on cisco switch 6509 hyprid IOS
08-29-2007 05:05 AM
Hi ,
From 7.6, port Security has a feature that would do it,
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_7_6/confg_gd/
sec_port.htm#wp1022694
set cam filter
That will block ANY frame with that source address, that computer won't be able to get
into the network AT ALL. As soon as the switch receives a frame, it always checks it
against the CAM table, it will find that address marked as "filter", so it will discard
the frame.
Regards,
~JG
08-29-2007 06:37 AM
You can anable port security on that interface.
set port security 2/1 enable
Console> (enable) set port security 2/1 enable 00-90-2b-03-34-08
Port 2/1 port security enabled with 00-90-2b-03-34-08 as the secure mac address
Trunking disabled for Port 2/1 due to Security Mode
Console> (enable)
Where 2/1 is the Server port.
You can see more in detail on below link:
Regards,
Dharmesh Purohit
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide