cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
160
Views
0
Helpful
2
Replies
Beginner

Making a routed switch virutal interface the default SVI

I am having an issue where I am adding a catalyst switch to my ACS server for AAA authentication.

I have a catalyst with the following:

inteface vlan 174

ip address 192.168.174.1

interface vlan 199

ip address 192.168.199.1

When I setup the switch in the ACS, the ACS rejects it because it sees the traffic coming from a different SVI 2.  I would like to set it up on SVI 174.  My question is, how do I make the traffic source out of SVI 174?

Thanks,
Josh

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Making a routed switch virutal interface the default SVI

Hello,

Can you try "ip tacacs source-interface "vlan id"" and see if that helps?

Regards,

NT

2 REPLIES 2
Cisco Employee

Re: Making a routed switch virutal interface the default SVI

Hello,

Can you try "ip tacacs source-interface "vlan id"" and see if that helps?

Regards,

NT

Beginner

Re: Making a routed switch virutal interface the default SVI

That worked.  Thanks a lot!

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards