%MLSCEF-SP-7-SHADOW_SSRAM_INCONSISTENCY error

[mayambanzumba]

Hi,

I am getting the below error on a Cisco6509 Switch version c6sup22-jk2sv-mz.121-26.E1.bin.  I have two WS-X6K-S2U-MSFC2 in Standby Active mode, but I am not sure from which card the errors are coming.  What does the error mean and is there a way to find out from which cards it is originating?

%MLSCEF-SP-7-SHADOW_SSRAM_INCONSISTENCY: FIB SSRAM Mismatch for Index: 98496
Expected: 1FFFF   , Hardware: D01FFFF

Thanks

Nzumba

[Giuseppe Larosa]

Hello Nzumba,

the error should come from active supervisor

%MLSCEF-SP-7-SHADOW_SSRAM_INCONSISTENCY: FIB SSRAM Mismatch for Index:  98496
Expected: 1FFFF   , Hardware: D01FFFF

because facility code is SP and not something else like SBYSP

see

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.1E/native/system/messages/edesc.html

the nearest message is:

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.1E/native/system/messages/emsg.html#wp1043580

note:

given the low level of severity 7 this is just a notification and should not take any corrective action.

>> Recommended Action   This message is for debugging purposes.

Hope to help

Giuseppe