Switching

Im having difficulties getting pass this vrf command on the 4900m using the management port. Just hoping for any guidance that can get this switch simply connected and used for a management IP.Snippet of the configip vrf mgmtVrf!vtp mode transparent!...

I've had the pleasure, or displeasure for those who may, of working on a 600-700 device(7000-10000) user base network with Open vmpsd as the vlan assignment method. Granted it's been rendered obsolete, and no longer supported on newer devices, is the...

i have 3560 sw with vlan 1 & 2 i need to assign printer port to both vlan and vlan 2

Hi All,I am facing problem configuring netflow anylyser.When I open console of netflow analyser. It show name of router and interface name for only two router for other it show IP address and interfaces as IFINDEX 1or 2 like that. Though the configur...

Hi2960 needs reachability to backbone-sw when link between 2960 and 4509 is down4509 is the server, All 2960 will be VTP clientOn 4509interface gi 0/1switchport trunk encap dot1qswitchport mode trunkinterface gi 0/2switchport trunk encap dot1qswitchp...

Hello there!I just wonder how i can make cisco to ignor gratuitous arps?thank you for your time and help.

Hi All,we have two different vlan's, vlan # (1) 172.14.2.0/24 and vlan # (2) 172.15.2.0/24 on the cisco 6500 with FWSM, recently we have moved a server in vlan # (1) which was before on another vlan # (3) 172.23.0.0/16 on the same cisco 6500.Before,w...

Hi All,My query is made up of two parts.PART 1------------I have two Cisco 2960G (WS-C2960G-48TC-L) switches loaded with IOS version 12,2(25)SEE1. I am looking to upgrade the IOS of the switches so I can securely manage the switches using SSH remotel...

Hi serniors,I have Lan/Wan setup in my office with Cisco routers & switches. OSPF is running on serial as well as multiaccess network. Yesterday I noticed that 2 routers changed adjacency from FULL/DROTHER to 2WAY/DROTHER. Network is running fine wit...

Hi,I have 2 cisco 831 routers and want to connect them together. What is the best way to do this?I have both straight-through and cross-over cables. I do not know whether these cables are right to useand what interfaces should I connect them: lan or ...

Hi,I have configured class-map which matches based on access-groupthis accessgroup is configured to match one specific hosti created a policymap and add this classmap under this and i specified "drop" action (Just for testing; assuming all the traffi...