06-22-2016 08:57 AM - edited 03-08-2019 06:19 AM
I have inserted a C3850-NM-10G module in a WS-C3850-48T but the ports are not being recognized by the switch.
I obtained this log:
*Jun 21 18:00:31.577: %PLATFORM_PM-6-FRULINK_UNKNOWN_INSERTED: Unsupported FRU module inserted in slot 1
This is the os version of the switch:
Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 56 WS-C3850-48T 03.07.03E cat3k_caa-universalk9 INSTALL
2 56 WS-C3850-48T 03.07.03E cat3k_caa-universalk9 INSTALL
It is strange because I also tried with a similar module in a WS-C3850 3.03.05 version and it worked allright.
Thanks for your help!
06-22-2016 06:12 PM
3.3.x is a buggy software train. Before doing anything please upgrade to the gold star release 3.6.4E.
06-22-2016 06:13 PM
Oops, ignore me. I see you are already on 03.07.03E. Which is the exact part number of the 10G module you are using?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide