This happened after upgrading our 6509-E with a new sup 720 10G. How can I do a " no shut" on the monitor sessions? Thanks!
-----------------------------------------------------------------------------
monitor session 1 source vlan 700 - 706 , 888
monitor session 1 destination interface Gi7/38
monitor session 2 type erspan-destination
shutdown
description Knoah_Call_Recording
destination interface Gi7/13
source
erspan-id 1
ip address 10.88.127.4
monitor session 3 type erspan-source
shutdown
source interface Gi7/27 , Gi7/33 - 34
destination
erspan-id 1
ip address 10.88.127.4
origin ip address 10.88.127.5