
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-27-2009 08:52 AM - edited 03-06-2019 05:57 AM
I'm trying to get the traffic going accross a vlan interface to be sent to another port(spanning)
I'm getting the following
Cat6513(config)#monitor session 5 source vlan 100
% Local Session limit has been exceeded
why?
Solved! Go to Solution.
- Labels:
-
Other Switching
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-27-2009 09:39 AM
Glad to help and learn at same time :-)
Please remember to use the rating system and mark, so other readers can save time when scanning thru issues.
Sam
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-27-2009 09:00 AM
How many SPAN sessions do u have at same time ?
Your SUP has probably exceeded its threshold of allowed sessions.
show monitor session all, will give u a summary.
http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015c612.shtml
HTH
Sam
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-27-2009 09:12 AM
Cat6513#sh monitor session all
Session 1
---------
Type : Local Session
Source Ports :
Both : Gi9/1,Gi9/7-9,Gi10/1-2,Gi10/5,Gi10/10
Destination Ports : Gi9/2
Session 2
---------
Type : Local Session
Source Ports :
Both : Gi9/1,Gi9/8,Gi10/1,Gi10/5
Destination Ports : Gi9/37,Gi10/6
I only have two
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-27-2009 09:26 AM
Then 2 is the limit.
see below for session limit per SUP type.
when testing I get more or less same message.
% This platform allows a maximum of 2 concurrent sessions with RX sources and
% 4 concurrent sessions with TX sources. (Bidirectional sources count as
% both RX and TX; remote VLAN sources count as RX.)
Try removing session you don't need or park it temporarily while you test.
HTH
Sam
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-27-2009 09:33 AM
Thanks for the info, you've been a real help!!
cheers
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-27-2009 09:39 AM
Glad to help and learn at same time :-)
Please remember to use the rating system and mark, so other readers can save time when scanning thru issues.
Sam
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-27-2009 09:43 AM
Done and done my good man!
