Hi,
When I look through the CLI I can see detailed information about MST instances:
switch1#show spanning-tree mst
##### MST0 vlans mapped: 1-1999
Bridge address 001e.bdc0.7180 priority 24576 (24576 sysid 0)
Root this switch for the CIST
Operational hello time 2 , forward delay 15, max age 20, txholdcount 6
Configured hello time 2 , forward delay 15, max age 20, max hops 20
Interface Role Sts Cost Prio.Nbr Type
---------------- ---- --- --------- -------- --------------------------------
Gi0/1 Desg FWD 20000 128.1 P2p
Gi0/2 Desg FWD 200000 128.2 P2p
Gi0/3 Desg FWD 200000 128.3 P2p
Gi0/4 Desg FWD 20000 128.4 P2p
Gi0/5 Desg FWD 20000 128.5 P2p
Gi0/6 Desg FWD 2000000 128.6 Shr
Gi0/8 Desg FWD 200000 128.8 P2p
Gi0/24 Desg FWD 20000 128.24 P2p
##### MST1 vlans mapped: 2000-4094
Bridge address 001e.bdc0.7180 priority 32769 (32768 sysid 1)
Root address 5006.0444.8b80 priority 20481 (20480 sysid 1)
port Gi0/24 cost 40000 rem hops 18
Interface Role Sts Cost Prio.Nbr Type
---------------- ---- --- --------- -------- --------------------------------
Gi0/24 Root FWD 20000 128.24 P2p
I have been looking at different SNMP MIBs, but I can't seem to find even basic information (like what the address of the root is for each MST instance) in there. Is there a way / MIB that can provide this information?
Thanks,
Sander
