I have an 861 that we are using for a test network and need to add static igmp addresses for multicast. We are using the router as a router on a stick with subinterfaces on the WAN link. I've looked everywhere to see how to add the static igmp addresses.
interface FastEthernet4
no ip address
no ip route-cache cef
no ip route-cache
ip cgmp
duplex auto
speed auto
interface FastEthernet4.10
encapsulation dot1Q 60
ip address 10.10.10.254 255.255.255.0
no ip route-cache
ip cgmp
Need to add static igmp addresses:
ip pim sparse-mode
ip igmp static-group 239.1.2.100
ip igmp static-group 239.1.2.101
ip igmp static-group 239.1.2.102