cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

108
Views
0
Helpful
2
Replies
Beginner

multiple IP on an interface of Cisco9300

Hi,

is there any way to assign 2 IPs to an interface of 9300.

i am running IOS XE 16.09.04 and sub-interface is not supported on this platform.

2 REPLIES 2
Rising star

Re: multiple IP on an interface of Cisco9300

It is possible.
Look it:


The optional secondary keyword allows you to specify an unlimited number of secondary addresses. Secondary addresses are treated like primary addresses, except the system never generates datagrams other than routing updates with secondary source addresses. IP broadcasts and Address Resolution Protocol (ARP) requests are handled properly, as are interface routes

 Physcal interface or vlan

interface GigabitEthernet 1/0/1
 ip address 192.108.1.27 255.255.255.0
 ip address 192.31.7.17 255.255.255.0 secondary


interface vlan 3000 ip address 192.108.1.27 255.255.255.0 ip address 192.31.7.17 255.255.255.0 secondary

 

Look documention about: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-5/command_reference/b_165_9300_cr/b_165_9300_cr_chapter_0100.html

Jaderson Pessoa
*** Rate All Helpful Responses ***
Highlighted
VIP Expert

Re: multiple IP on an interface of Cisco9300

Hi,

How about using vlans? What is that you are trying to do?

HTH

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards