Hi -

turklandbank · ‎11-26-2016

Hello

Which NxOS versions on Nexus 7706 switch support VPC+ ? There are so confusing information about this in relase notes. I could not find a clear answer.

My version is 7.2(1)D1(1) . It looks it does not support in reality. But in Release notes of 7.2(1)D1(1) there are some paragraphs about VPC+. If it supports how can i turn it on?

Thanks for the answers, in advance.

Regards.

Reza Sharifi · ‎11-26-2016

Hi,

vPC+ or enhanced vPC has been supported since NS-OS version 5. There is no need to turn on anything. It is on by default.

HTH

turklandbank · ‎11-27-2016

Hi, thanks for the answer.

Now the question changes to a different path.

We have 2 2348TQ FEX switches cross connected on 2 nexus 7760.

It seems we are unable to make multi switch etherchannel ports on different 2348 unlike other ports on 7Ks itself.

I read someting like for this feature are supported on N5K backbones and to be supported on 7K with VPC+.

Is it correct? Does anyone have experience with this situation?

Regards.

Paul Chapman · ‎11-27-2016

Hi -

Let's clarify terminology here as it's important to differentiate they types of vPC configurations you can do.

vPC - This configuration is the most common and requires a pair of Nexus switches. The downstream device thinks that it is connected to one parent.

eVPC or Enhanced vPC - This is only available when connecting a Nexus 2000 to 2 parent Nexus 5000 switches (dual-homed FEX). Downstream devices are connected to the Nx2K (or more than 1 Nx2K).

vPC+ - This is a vPC domain acting as a leaf switch in a FabricPath domain.

It is critically important to note that dual-homed FEX is only available on the Nx5K platform. (I believe it was scheduled to be supported on Nx6K also, but that platform is being deprecated.)

PSC

Reza Sharifi · ‎11-27-2016

Hi,

I addition to Paul's comments, I know that the replacement for the 6k series (5696Q series) support dual homing Fex. As for the 7k, have a look at this document, but before you do anything check with your Cisco SE to make sure it actually is supported. Sometimes documentations are not correct.

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus2000/sw/configuration/guide/b_Configuring_the_Cisco_Nexus_2000_Series_Fabric_Extender_rel_7_x/b_Configuring_the_Cisco_Nexus_2000_Series_Fabric_Extender_rel_7_x_chapter_010.html#concept_2A406D419D104BE685AFC6D43F6A5457

HTH

turklandbank · ‎11-27-2016

Hello again. Thanks for the information. My topology is as follows. Currently I am not able to connect a server to 2 N2Ks for redundancy.

- Bridge mode is not allowed (BPDU guard prevents and cannot be disabled).

- Teaming with etherchannel is not configurable on fex switches in this topology.

- Switch independent teaming on server is working a few hours then N2K ports become zombie.

I am seeking for another option now. A patch or update or someting else?

Regards.

Paul Chapman · ‎11-28-2016

Hi -

On the assumption that current N7K code supports AA-FEX (or dual-home FEX), please post the configurations related to the FEX and downstream server. Post configs from both 7K-A and 7K-B

show run fex
show run int pox member
show int pox status

PSC

turklandbank · ‎11-28-2016

Hello, thanks for your attention.

Here are the command outputs for N7k-A (Herkul-1), and N7k-B (Herkul-2).

I am unable to make a port channel configuration on downstream server N2K ports on different N2Ks.

Server is connected to ports E107/1/3, and E108/1/3 ports on both n7Ks.

*************************************************************************************************
THIS IS A PRIVATE COMPUTER SYSTEM.
USAGE MAY BE MONITORED AND UNAUTHORIZED
ACCESS OR USE MAY RESULT IN CRIMINAL OR
CIVIL PROSECUTION
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2015, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
Herkul-1# show run fex

!Command: show running-config fex
!Time: Mon Nov 28 11:31:41 2016

version 7.2(1)D1(1)
install feature-set fex
feature-set fex

fex 107
pinning max-links 1
description FEX0107
fex 108
pinning max-links 1
description FEX0108

interface port-channel11
switchport mode fex-fabric
fex associate 108

interface port-channel12
switchport mode fex-fabric
fex associate 107

interface Ethernet1/1
switchport mode fex-fabric
fex associate 108

interface Ethernet1/2
switchport mode fex-fabric
fex associate 108

interface Ethernet1/3
switchport mode fex-fabric
fex associate 108

interface Ethernet1/4
switchport mode fex-fabric
fex associate 108

interface Ethernet1/5
switchport mode fex-fabric
fex associate 107

interface Ethernet1/6
switchport mode fex-fabric
fex associate 107

interface Ethernet1/7
switchport mode fex-fabric
fex associate 107

interface Ethernet1/8
switchport mode fex-fabric
fex associate 107

Herkul-1# show run int po11 membership

!Command: show running-config interface port-channel11 membership
!Time: Mon Nov 28 11:31:49 2016

version 7.2(1)D1(1)

interface port-channel11
description Fex108 uplink 1 (Eth1/1-4) 4x10Gbps - kabinet B108
switchport
switchport mode fex-fabric
fex associate 108
vpc 11

interface Ethernet1/1
description Fex108 uplink 1 1.baglanti
switchport
switchport mode fex-fabric
fex associate 108
channel-group 11
no shutdown

interface Ethernet1/2
description Fex108 uplink 1 2.baglanti
switchport
switchport mode fex-fabric
fex associate 108
channel-group 11
no shutdown

interface Ethernet1/3
description Fex108 uplink 1 3.baglanti
switchport
switchport mode fex-fabric
fex associate 108
channel-group 11
no shutdown

interface Ethernet1/4
description Fex108 uplink 1 4.baglanti
switchport
switchport mode fex-fabric
fex associate 108
channel-group 11
no shutdown

Herkul-1# show run int po12 membership

!Command: show running-config interface port-channel12 membership
!Time: Mon Nov 28 11:32:16 2016

version 7.2(1)D1(1)

interface port-channel12
description Fex107 uplink 1 (Eth1/5-8) 4x10Gbps - kabinet B107
switchport
switchport mode fex-fabric
fex associate 107
vpc 12

interface Ethernet1/5
description Fex107 uplink 1 1.baglanti
switchport
switchport mode fex-fabric
fex associate 107
channel-group 12
no shutdown

interface Ethernet1/6
description Fex107 uplink 1 2.baglanti
switchport
switchport mode fex-fabric
fex associate 107
channel-group 12
no shutdown

interface Ethernet1/7
description Fex107 uplink 1 3.baglanti
switchport
switchport mode fex-fabric
fex associate 107
channel-group 12
no shutdown

interface Ethernet1/8
description Fex107 uplink 1 4.baglanti
switchport
switchport mode fex-fabric
fex associate 107
channel-group 12
no shutdown

Herkul-1# show int po11 status

--------------------------------------------------------------------------------
Port Name Status Vlan Duplex Speed Type
--------------------------------------------------------------------------------
Po11 Fex108 uplink 1 connected 1 full a-10G --
Herkul-1# show int po12 status

--------------------------------------------------------------------------------
Port Name Status Vlan Duplex Speed Type
--------------------------------------------------------------------------------
Po12 Fex107 uplink 1 connected 1 full a-10G --
Herkul-1#

Herkul-1# show run int e107/1/3

!Command: show running-config interface Ethernet107/1/3
!Time: Mon Nov 28 11:40:45 2016

version 7.2(1)D1(1)

interface Ethernet107/1/3
description hypervtst1 port (2) 10G
switchport
switchport mode trunk
no shutdown

Herkul-1#

Herkul-1# show run int e108/1/3

!Command: show running-config interface Ethernet108/1/3
!Time: Mon Nov 28 11:44:14 2016

version 7.2(1)D1(1)

interface Ethernet108/1/3
description hypervtst1 port (1) 10G
switchport
switchport mode trunk
no shutdown

Herkul-1#

*******************************************************************************************

...
THIS IS A PRIVATE COMPUTER SYSTEM.
USAGE MAY BE MONITORED AND UNAUTHORIZED
ACCESS OR USE MAY RESULT IN CRIMINAL OR
CIVIL PROSECUTION
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2015, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
Herkul-2# show run fex

!Command: show running-config fex
!Time: Mon Nov 28 11:36:40 2016