cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1710
Views
0
Helpful
2
Replies

N7K can't save the configuration

YUEN WAI NAM
Level 1
Level 1

The N7K can't save the configuration to startup, here is the error message, the box is running 5.0.5, is it a software bug ? See you have any suggestions. Thanks

N7K-1# copy run startup-config

[########################################]  100%

Configuration update aborted: request was  aborted

Log message

===========

2013 May 31 09:59:01 %SYSMGR-STANDBY-5-CFGWRITE_STARTED: Configuration copy started (PID  2547).

2013 May 31 09:59:02 %SYSMGR-STANDBY-5-SUBPROC_TERMINATED: "System Manager (configuration  controller)" (PID 2547) has finished with error code SYSMGR_EXITCODE_SYSERR  (1).

2013 May 31 09:59:15  %SYSMGR-3-CFGWRITE_FAILED: Configuration copy failed (error-id  0x401E0000).

2 Replies 2

InayathUlla Sharieff
Cisco Employee
Cisco Employee

Hi Yuen,

Yes indeed you are hitting the bug.

CSCtj92312 and advised to apply the workaround to reload the standby sup.

You can find more information regarding the bug in the following link:

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtj92312

HTH

Regards

Inayath

*****Please rate useful posts and remember to mark any solved questions as answered. Thank you.*****

Yuen,

Did you happen to switchover to standby or did the reload of te module?

Can I have the status on this please?

HTH

REgards

Inayath