ā02-12-2012 08:43 AM - edited ā03-07-2019 04:53 AM
Hi Guys
1)what is the difference between N7K-F132XP and N7K-M132XP-15?
2)Nexus 7000 - 32 Port 1G/10G Ethernet Module, SFP/SFP+,for SFP+ the module fits inside it is:GLC-SX-MM ,what if i need to run normal SFP(1GIG) what is the module name fits inside N7K-M132XP-15?
2)what is the name of line card that support FCOE to uplink directly to SAN Fabric via the N7K instad of FC Module on the N5K?
3)is the GLC -T support SFP or its just twisted Pair,what is the reason of it?is this require N7K-M148GT-11 Require GLC-T?
4) SFP-H10GB-CU3M ,what is the need of the Twinax cable what module needs where could be plugged
C3KX-NM-10G,which SFP and SFP+ support in this Network Module?
thanks
ā02-12-2012 04:10 PM
1. F1 is layer 2 only and does not Layer 3 operations. In order to do layer 3 you need to use the M1 card for layer 3 proxing. This needs to be carefully planned out as you basically share the M1's layer 3 routing capabilities and connection into the fabric.
2. I'm guessing you mean N7K-M132XP-12? This module doesnt support 1G SFP, its 10G SFP+ only.
3. N7K-M148GT-11 is the 48port copper line cards that does not accept SFP, its just normal twisted-pair linecard. N7K-M148GS-11 accepts SFP which can be the GLC-T (copper SFP)
4. SFP-H10GB-CU3M is a twinax cable, it has the 10G module inside already as single unit, you don't need a module, its a cable with 10G module built in. You plug this into a SFP+ port on the nexus, like a N7K-M132XP-12 or F1/F2 card.
C3KX-NM-10G can only support 1,3,5 meter twinax (SFP-H10GB-CU5M), it doesnt support the 7 or 10 meter.
ā02-12-2012 07:20 PM
2)Nexus 7000 - 32 Port 1G/10G Ethernet Module, SFP/SFP+,for SFP+ the module fits inside it is:GLC-SX-MM ,what if i need to run normal SFP(1GIG) what is the module name fits inside N7K-M132XP-15?
2)what is the name of line card that support FCOE to uplink directly to SAN Fabric via the N7K instad of FC Module on the N5K?
The only module that supports 1G/10GE is the F2 module:
http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9402/data_sheet_c78-685394.html
N7K doesn't have any native FC module.
HTH,
jerry
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide