This is the new device. Please help. Is this normal or initial behavior?
User Access Verification
(none) login: admin
********************************************************************************
Fabric discovery in progress, show commands are not fully functional
Logout and Login after discovery to continue to use show commands.
Run show discoveryissues for more details.
********************************************************************************
(none)#
(none)#
(none)#
(none)# show discoveryissues
================================================================================
Check 1 Platform Type
================================================================================
Test01 Retrieving Node Role PASSED
[Info] Current node role: LEAF
[Info] Please check CH09 DHCP status section for configured node role
================================================================================
Check 2 FPGA/BIOS in sync test
================================================================================
Test01 FPGA version check PASSED
[Info] No issues found for FPGA versions
Test02 BIOS version check PASSED
[Info] No issues found for BIOS versions
================================================================================
Check 3 HW Modules Check
================================================================================
Test01 Fans status check PASSED
[Info] All fans status is ok
Test02 Power Supply status check PASSED
[Info] All PSUs status is ok
Test03 Fan Tray status check PASSED
[Info] All FanTrays status is ok
Test04 Line Card status check PASSED
[Info] All LineCard status is ok
================================================================================
Check 4 Node Version
================================================================================
Test01 Check Current Version PASSED
[Info] Node current running version is : n9000-15.2(8d)
================================================================================
Check 5 System State
================================================================================
Test01 Check System State FAILED
[Warn] Top System State is : out-of-service
[Info] Node upgrade is in notscheduled state
================================================================================
Check 6 Updated LLDP Adjacencies
================================================================================
Test01 LLDP Adjacency Check PASSED
[Info] No LLDP adjacencies present
================================================================================
Check 7 BootStrap Status
================================================================================
Test01 Check Bootstrap/L3Out config download FAILED
[Warn] BootStrap/L3OutConfig URL not found
[Info] Ignore this if this node is not an IPN attached device
================================================================================
Check 8 Infra VLAN Check
================================================================================
Test01 Check if infra VLAN is received FAILED
[Warn] Infra VLAN not received
================================================================================
Check 9 DHCP Status
================================================================================
Test01 Check Node Id FAILED
[Error] Valid Node Id not received via DHCP response
Test02 Check Node Name FAILED
[Error] Valid Node name not revevied via DHCP
Test03 Check TEP IP FAILED
[Error] Valid TEP IP not revevied via DHCP
Test04 Check Configured Node Role FAILED
[Error] Valid Node Role not received via DHCP response
Test05 DHCP Msg Stats FAILED
[Error] Cannot retrive DHCP discover stats
[Error] Cannot retrive DHCP offer stats
[Error] Cannot retrive DHCP request stats
[Error] Cannot retrive DHCP ACK stats
[Fatal-Error] Please check DHCP issues...Aborting command execution
(none)#
(none)# show run
Incorrect command "show run"
(none)# ?
bash: !: command not found
(none)#
