08-19-2024 02:37 PM
I have a requirement to add a secondary stack to a 3850 switch.
The primary switch is set as priority 1 and the standby which will be connected is set at priority 14. Will I be able to copy ios into both switches stacked without changing priority
08-19-2024 03:13 PM
@mohammedsajjad818 wrote:
I have a requirement to add a secondary stack to a 3850 switch.
Is the switch master configured for Install Mode?
If the switch master is in Install Mode, enter the following command:
conf t
software auto-upgrade enable
end
wr
Once the above command is in, connect the new stack member to the stack and let the stack master do the rest.
08-19-2024 05:05 PM
What I need to clarify is that I have the switch 1 priority set as 1 and switch 2 priority set as 14. So if I change the priority of switch 1 to 15 and copy ios to the switches in one go and reload the switch, will it cause any issues. Will the iOS get copied to both the switches.
08-19-2024 05:58 PM
Whichever unit is the intended Switch Master should have a priority level of 15.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide