Need Help with firmware upgrade

[aottowitz]

I recently purchased a Catalyst 3850 and have been trying to upgrade to a newer firmware.

I run the

#install add file flash:cat3k_caa-universalk9.16.12.09.SPA.bin activate commit

everything up to commit finish and passes and then I am met with the following error.

/usr/binos/conf/install_util.sh: line 157: /bootflash/.prst_sync/reload_info: No such file or directory
cat: /bootflash/.prst_sync/reload_info: No such file or directory
/common: line 922: cd: /bootflash/.prst_sync: No such file or directory
--- Starting initial file syncing ---
/common: line 922: cd: /bootflash/.prst_sync: No such file or directory
FAILED: Invalid source filename when attempting to copy source file

any 

[M02@rt37]

Hello @aottowitz,

Try #install add file bootflash:cat3k_caa-universalk9.16.12.09.SPA.bin activate commit

[Leo Laohoo]

---

@aottowitz wrote:

/usr/binos/conf/install_util.sh: line 157: /bootflash/.prst_sync/reload_info: No such file or directory
cat: /bootflash/.prst_sync/reload_info: No such file or directory
/common: line 922: cd: /bootflash/.prst_sync: No such file or directory
--- Starting initial file syncing ---
/common: line 922: cd: /bootflash/.prst_sync: No such file or directory
FAILED: Invalid source filename when attempting to copy source file

---

I don't know.  But the error message, if anyone actually bothered to read, is very glaring.  

Post the complete output to the command "dir flash:cat3k_caa-universalk9.16.12.09.SPA.bin".