Hi, i have two Cisco SB 300 and one Cisco AP541N Wireless Access Point.
I will be using the two switches in to places with fiber between them. The AP541N will be using as AP for intranet/internet ang guest to internet. To use it for guest i need to use VLan. There is a Sonicwall TZ210 as firewall and i can use one port on that as DMZ if i need to.
1 Cisco SB 300 (8 ports + 2 TP/GBIC) (2 ports + fiber is in use): named: Cisco-01
1 ASUS 24 port switch (NOT management, only standard switch)
There is 15-20 workplaces that connects with the ASUS 24-port switch, that switch connects to port 1 on Cisco SB 300
The AP541N connects to port 5 on the Cisco SB 300.: named: AP-01
The Cisco SB 300 port 10 (Gbic) connects to the SB 300 on 2nd floor with fiber.
2 ASUS 24 port switch (NOT management, only standard switch)
1 Sonicwall TZ 210 firewall: Named: Firewall-01
There is 30 workstations + some servers (yes, DHCP server to), they connects to the ASUS switches
The ASUS switches connects to LAN port on Sonicwall
The Cisco SB 300 port 1 connects to one of the ASUS switches
The Cisco SB 300 port 8 i want to connect to DMZ on Sonicwall if possible
The Cisco SB 300 port 10(Gbic) connect with fiber to the Cisco SB 300 in floor 1
Firewall-01: 192.168.1.1 (this is the gatway)
DHCP Scoop from server: 192.168.1.100-200
I have made VLan-10 and did managed to get the port-5 on cisco-01 to be in a vlan to port-8 on cisco-02. I can ping the AP-01 from all places on 192.168.1.15, but i cant get the AP-01 to deliver ipadresses from, the DHCP server, but if i connect a DHCP server to port-8 on cisco-02 then that can publish ipadresses to the clients that connects to the standard SSID on the AP-01, but thats not the way i want it to do. I think this could be solved in two ways:
1: get a DHCP server thats on DMZ to deliver ip adresses to the VLAN-10
2: get the Cisco-02 (Cisco SB 300 that connects to the asus switches that connects to the firewall) to intervlan to sonicwall??
Is there some information someplace that i could look at to get this to work?
I have Cisco 2960 switch & I am going to use MST for spanning tree Below is the configuration spanning-tree mst configuration name TEST-MST revision 1 instance 1 vlan 101 instance 1 vlan 102 I have 2 VLANS & I wa...
We are having issues with a WS-C2960X-48FPD-L running IOS 15.2(2)E7. Some ports are simply not working. We had POE issues on some of the ports and decided to upgrade to hopefully resolve those issues but this has now become an even bigger issu...
the scenario is :I'm replacing core Cisco switch 4506-E with switch 4507R-E. As I have one supervisor card on 4506-E and I'm going to take out all the card that I have in 4506-E and install it in the new 4507R-E. On the 4507R-E I have 2 slots for the supe...
Since its release in August of 2019, the SASE report released by Gartner has generated a lot of chatter regarding what SASE is all about. People are wondering whether it will be disruptive to the current network and network security designs and are curiou...
I tried to setup a virtual environment with 2960 switches and 2911 Router. In one part of the network where I connected PCs directly to the 2911 Router, I was able to communicate to the attached devices, having configured static route. In the th...