cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
383
Views
0
Helpful
5
Replies
mrochac
Beginner

Netflow on 2960x - How to configure netflow, is it possible?

Good afternoon (from where i am) to everyone - i have PRTG working fine with netflow collecting traffic for my routers but i cant seem to be able to get the same results from 2960x switch.

 

what am i missing?

Your help is greatly appreciated.

1 ACCEPTED SOLUTION

Accepted Solutions
Reza Sharifi
Hall of Fame Expert

Hi,

Overall, the 2960x is layer-2 and has limited NetfLow functionalities and also depend on the license you have,

here is the config guide:

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960x/software/15-0_2_EX/fnf/configuration_guide/b_nf_152ex_2960-x_cg.pdf'

HTH

View solution in original post

5 REPLIES 5
Reza Sharifi
Hall of Fame Expert

Hi,

Overall, the 2960x is layer-2 and has limited NetfLow functionalities and also depend on the license you have,

here is the config guide:

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960x/software/15-0_2_EX/fnf/configuration_guide/b_nf_152ex_2960-x_cg.pdf'

HTH

View solution in original post

Hi Reza - how do i find out licensing?

Reza Sharifi
Hall of Fame Expert

Hi,

"sh license" or even better "show version" should show you what type of license you have installed.

HTH

Index 1 Feature: lanlite
Period left: 0 minute 0 second
Index 2 Feature: lanbase
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Priority: Medium
License Count: Non-Counted
Reza Sharifi
Hall of Fame Expert

"show version" is probably a better choice.

HTH