Netflow on 2960x - How to configure netflow, is it possible?

[mrochac]

Good afternoon (from where i am) to everyone - i have PRTG working fine with netflow collecting traffic for my routers but i cant seem to be able to get the same results from 2960x switch.

what am i missing?

Your help is greatly appreciated.

[Reza Sharifi · Accepted solution]

Hi,

Overall, the 2960x is layer-2 and has limited NetfLow functionalities and also depend on the license you have,

here is the config guide:

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960x/software/15-0_2_EX/fnf/configuration_guide/b_nf_152ex_2960-x_cg.pdf'

HTH

[mrochac]

Hi Reza - how do i find out licensing?

[Reza Sharifi]

Hi,

"sh license" or even better "show version" should show you what type of license you have installed.

HTH

[mrochac]

Index 1 Feature: lanlite

Period left: 0 minute 0 second

Index 2 Feature: lanbase

Period left: Life time

License Type: Permanent

License State: Active, In Use

License Priority: Medium

License Count: Non-Counted

[Reza Sharifi]

"show version" is probably a better choice.

HTH