06-07-2018 11:08 AM - edited 03-08-2019 03:17 PM
Good afternoon (from where i am) to everyone - i have PRTG working fine with netflow collecting traffic for my routers but i cant seem to be able to get the same results from 2960x switch.
what am i missing?
Your help is greatly appreciated.
Solved! Go to Solution.
06-07-2018 11:26 AM
Hi,
Overall, the 2960x is layer-2 and has limited NetfLow functionalities and also depend on the license you have,
here is the config guide:
HTH
06-07-2018 11:26 AM
Hi,
Overall, the 2960x is layer-2 and has limited NetfLow functionalities and also depend on the license you have,
here is the config guide:
HTH
06-07-2018 12:29 PM
Hi Reza - how do i find out licensing?
06-07-2018 01:11 PM
Hi,
"sh license" or even better "show version" should show you what type of license you have installed.
HTH
06-08-2018 06:52 AM
06-08-2018 09:23 AM
"show version" is probably a better choice.
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide