09-15-2018 01:24 AM - edited 03-08-2019 04:10 PM
i have entered the below configuration on my cisco router for collecting netflow information.
R1(config)#ip flow-export destination 192.168.30.134
R1(config)#ip flow-export version 9
R1(config)#interface f0/0
R1(config-if)#ip flow egress
R1(config-if)#exit
when i enter " show ip cache flow " it does not show any egress data.why ? although many traffic are originating from my device.
09-15-2018 01:50 AM
Hello,
try and enable ingress as well:
R1(config-if)#ip flow ingress
What is the output of 'show ip cache flow' now ?
09-15-2018 02:47 AM
shows only ingress traffic. it does not show any egress traffic
09-15-2018 04:01 AM
Hello,
which device is this on, and which IOS version are you running ?
09-15-2018 06:20 AM
Cisco Router 1941 and version 15.2. Is my configuration correct ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide