01-29-2019 02:50 AM - edited 03-08-2019 05:10 PM
we are upgrading our network, so we're going from WS-C6513-E to Cisco Catalyst C9407R Chassis, but the the issue with the Cisco Catalyst C9407R Chassis it doesn't have a 40G line card, so is there a 40G module that supports the Cisco Catalyst C9407R Chassis ?
Thank you in advance.
01-29-2019 03:01 AM - edited 01-29-2019 03:03 AM
Not currently , the 9500 does and 100gb ports
C9500
● Cisco Unified Access™ Data Plane (UADP) Application-Specific Integrated Circuit (ASIC) ready for next-generation technologies with its programmable pipeline, microengine capabilities, and template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality-of-Service (QoS) entries
● Intel® 2.4-GHz x86 CPU with up to 120 GB of USB 3.0 or up to 960 GB of SATA SSD storage for container-based application hosting
● Up to 6.4-Tbps switching capacity with up to 2 Bpps of forwarding performance
● Up to 32 nonblocking 100 Gigabit Ethernet QSFP28 ports
● Up to 32 nonblocking 40 Gigabit Ethernet QSFP+ ports
● Up to 48 nonblocking 25 Gigabit Ethernet SFP28 ports
● Up to 48 nonblocking 10 Gigabit Ethernet SFP+ ports
● Platinum-rated AC/DC power supplies
01-29-2019 03:04 AM
Hello,
according to the doc below, the Catalyst 9400 Supervisor Engine-1 and Supervisor Engine-1XL uplink options include two 40G ports (check Table 6 and Table 7):
01-29-2019 03:06 AM
01-29-2019 03:15 AM
yes, but besides the supervisor engine-1 and the supervisor engine-1xl, are there any ?
01-29-2019 04:26 AM
Hello,
no, I don't think there are any line cards with 40G ports...
01-29-2019 04:32 AM
01-29-2019 03:58 AM
HI,
Please have a look!
Cisco Catalyst 9400 Supervisor Engine-1XL-Y uplink options
Supervisor configuration |
Uplink ports options |
Single supervisor |
8x 10 Gigabit Ethernet ports are active (ports 1 to 8) (2x 40 Gigabit Ethernet ports are disabled [ports 9 to 10]) |
2x 40 Gigabit Ethernet ports are active (ports 9 to 10) (8x 10 Gigabit Ethernet ports are disabled [ports 1 to 8]) |
|
4x 10 Gigabit Ethernet and 1x 40 Gigabit Ethernet ports are active (the other 4x 10 Gigabit Ethernet 1x 40 Gigabit Ethernet ports are disabled) |
|
2x 25 Gigabit Ethernet ports are active (ports 1 and 5) (6 x 10 Gigabit Ethernet ports are disabled (ports 2-4 and 6-8) and 2 x 40G [ports 9 to 10]) |
|
4x 10 Gigabit Ethernet and 1 x 25 Gigabit Ethernet ports are active (the remaining ports are disabled) |
|
1x 25 Gigabit Ethernet and 1x 40 Gigabit Ethernet ports are active (the remaining ports are disabled) |
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide