05-22-2023 06:28 AM
I am using the command username xxxxxx privilege 15 password whateverpassword
I have login local and transport input ssh on the line vty configs
ip http server
I can't login with exec/password, username/password or anything else from my desktop. I can login via console cable.
05-22-2023 06:35 AM - edited 05-22-2023 06:35 AM
If you are trying to telnet or ssh to the switch via the IP address, first make sure your laptop/pc can ping the switch. Once that is ok, post the output of error you are getting when attempting to telnet or ssh. Your desktop/laptop IP needs to be in the same IP segment as the switch.
HTH
05-22-2023 06:36 AM - edited 05-22-2023 06:38 AM
can I see config of vty and console
NOTE:- for vty you must sure that the PC have IP and this IP is in subnet of VLAN the PC connect to SW, and there is inter-vlan if you try to access SW via other vlan (not same VLAN you connect to)
05-22-2023 06:54 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide