05-15-2007 06:42 AM - edited 03-05-2019 04:04 PM
Why do I get the folowing response when I run command "show diagnostic sanity" on a new 720 out of the box from Cisco Systems?
Invalid boot image "bootdisk:s72033-ipservices_wan-vz.122-18.SXF8.bin" specified in the boot string.
Please check your boot string.
None of the images specified in the boot string are valid.
Please specify at least one valid image in the boot string to ensure the
switch is in a bootable state.
Could not verify boot image "bootdisk:s72033-ipservices_wan-vz.122-18.SXF8.bin" specified in the boot string on the slave.
05-15-2007 07:37 AM
Hi Chris,
Can you confirm me few things here:-
1) Output of "sh boot"
2) Output of "sh mod"
3) Output of "sh run | in boot"
4) dir sup-bootflash: & dir disk0:
5) Output of "sh version"
Regards,
Ankur
05-15-2007 08:14 AM
05-15-2007 08:45 AM
Hi Chris,
I believe I am close but need few more details to confirm you the same.
Just paste the output of "dir slavedisk0:" & "dir slavesup-bootflash:"
Regards,
Ankur
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide