05-09-2013 08:30 AM - edited 03-07-2019 01:16 PM
sh fex
FEX FEX FEX FEX
Number Description State Model Serial
------------------------------------------------------------------------
105 FEX0105 Image Download N2K-C2232TM-E-10GE
sh fex
FEX FEX FEX FEX
Number Description State Model Serial
------------------------------------------------------------------------
105 FEX0105 Offline N2K-C2232TM-E-10GE
sh fex detail
FEX: 105 Description: FEX0105 state: Image Download
FEX version: 5.2(1)N1(1) [Switch version: 5.1(3)N2(1)]
FEX Interim version: 5.2(1)N1(1)
Switch Interim version: 5.1(3)N2(1)
Module Sw Gen: 12594 [Switch Sw Gen: 21]
post level: complete
pinning-mode: static Max-links: 1
Fabric port for control traffic: Eth1/30
FCoE Admin: false
FCoE Oper: true
FCoE FEX AA Configured: false
Fabric interface state:
Eth1/30 - Interface Up. State: Active
Fex Port State Fabric Port
Logs:
05/09/2013 15:07:12.422897: Requesting satellite to download image
05/09/2013 15:08:00.845430: Module register received
05/09/2013 15:08:00.846096: Registration response sent
05/09/2013 15:08:00.846355: Requesting satellite to download image
05/09/2013 15:08:43.451649: Module register received
05/09/2013 15:08:43.452430: Registration response sent
05/09/2013 15:08:43.452689: Requesting satellite to download image
05/09/2013 15:09:33.886198: Module register received
05/09/2013 15:09:33.887064: Registration response sent
05/09/2013 15:09:33.887417: Requesting satellite to download image
05/09/2013 15:10:32.17131: Module register received
05/09/2013 15:10:32.17798: Registration response sent
05/09/2013 15:10:32.18049: Requesting satellite to download image
05/09/2013 15:11:04.511120: Module register received
05/09/2013 15:11:04.511781: Registration response sent
05/09/2013 15:11:04.512054: Requesting satellite to download image
05/09/2013 15:11:38.805792: Module register received
05/09/2013 15:11:38.806668: Registration response sent
05/09/2013 15:11:38.807026: Requesting satellite to download image
05/09/2013 15:12:15.70054: Module register received
05/09/2013 15:12:15.70717: Registration response sent
05/09/2013 15:12:15.70989: Requesting satellite to download image
05/09/2013 15:12:53.104690: Module register received
05/09/2013 15:12:53.105354: Registration response sent
05/09/2013 15:12:53.105624: Requesting satellite to download image
05/09/2013 15:13:33.379258: Module register received
05/09/2013 15:13:33.380045: Registration response sent
05/09/2013 15:13:33.380306: Requesting satellite to download image
05/09/2013 15:14:15.661734: Module register received
05/09/2013 15:14:15.662512: Registration response sent
05/09/2013 15:14:15.662771: Requesting satellite to download image
05/09/2013 15:14:59.789993: Module register received
05/09/2013 15:14:59.790835: Registration response sent
05/09/2013 15:14:59.791094: Requesting satellite to download image
05/09/2013 15:15:30.245883: Deleting route to FEX
05/09/2013 15:15:30.253193: Module disconnected
05/09/2013 15:15:30.255081: Module Offline
Solved! Go to Solution.
05-09-2013 09:04 AM
Hi,
The N2K-C2232TM-E-10GE is not supported in NX-OS 5.1(3)N2(1). As per Table 2 in the Cisco Nexus 5000 Series and Cisco Nexus 2000 Series Release Notes the first release supported is 5.2(1)N1(1).
The FEX already have this release installed as seen from the show fex detail. You'll have to upgrade the Nexus 5000 to support these FEX.
Regards
05-09-2013 08:44 AM
I am assuming you have a nexus 5K with these FEXs?
if so, what is the version of software on the 5K?
05-09-2013 08:48 AM
Yes its a 5k. sorry forgot to post the software version for the 5k
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_series_home.html
Copyright (c) 2002-2012, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
Software
BIOS: version 3.5.0
loader: version N/A
kickstart: version 5.1(3)N2(1)
system: version 5.1(3)N2(1)
power-seq: Module 1: version v1.0
Module 2: version v1.0
Module 3: version v2.0
uC: version v1.2.0.1
SFP uC: Module 1: v1.0.0.0
05-09-2013 08:58 AM
I believe if you go with 5.1.3 it should work.
5k should be the same or higher os version.
or upgrade 5k to 5.2(1) first, same as you are trying to upgrade to on the FEXs.
05-09-2013 09:04 AM
Hi,
The N2K-C2232TM-E-10GE is not supported in NX-OS 5.1(3)N2(1). As per Table 2 in the Cisco Nexus 5000 Series and Cisco Nexus 2000 Series Release Notes the first release supported is 5.2(1)N1(1).
The FEX already have this release installed as seen from the show fex detail. You'll have to upgrade the Nexus 5000 to support these FEX.
Regards
05-09-2013 09:06 AM
ty steve ill give that a go. appreciate both you guys help
05-09-2013 09:21 AM
Glad to be of help. Thanks for the rating.
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide