Hi
Just wondering if best practices for an N7K are just as relevant to the N3K platform (line card specifics and all that aside of course).
I'm reading this document:
https://www.cisco.com/c/dam/en/us/td/docs/switches/datacenter/sw/design/vpc_design/vpc_best_practices_design_guide.pdf
One of the main things that I am interested in are the requirement, or, shall we say strong recommendation to have a port channel dedicated to VPC traffic and a port channel dedicated to non-VPC traffic. Is this still the case. I have built VPC before without following this guidance and it has worked fine in a large environment with only a few key VLAN's included in the dual-active exclude config.
Thanks