cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
867
Views
0
Helpful
3
Replies

Nexus 5010 and 5548 make a VPC not available ?

lcd_shouldit
Level 1
Level 1

Hi, could I configure vpc use one peer is Nexus 5010 and another peer is 5548 ?

1 Accepted Solution

Accepted Solutions

Some more reference for you:

55xx will work fine. You can vpc a 5548 to a 5596. You cannot however vpc a 5010/5020 to a 55xx.

5010/5020 - gatos asic
5548/5596 - carmel asic

Basically they have to be the same kind of asic to work together in vpc.

http://www.vnephos.com/index.php/2011/04/nexus-55xx-50x0-vpc-incompatibility/

HTH

Regards

Inayath

*Plz rate all usefull posts and mark the thread as answered if it has solved your query.

View solution in original post

3 Replies 3

InayathUlla Sharieff
Cisco Employee
Cisco Employee

A Nexus 50x0 cannot be a vPC peer for Nexus 55xx due to different ways of VPC implementation between the two.

HTH

REgards

Inayath.

Some more reference for you:

55xx will work fine. You can vpc a 5548 to a 5596. You cannot however vpc a 5010/5020 to a 55xx.

5010/5020 - gatos asic
5548/5596 - carmel asic

Basically they have to be the same kind of asic to work together in vpc.

http://www.vnephos.com/index.php/2011/04/nexus-55xx-50x0-vpc-incompatibility/

HTH

Regards

Inayath

*Plz rate all usefull posts and mark the thread as answered if it has solved your query.

Hi,thank you so much for your information.

Sent from Cisco Technical Support iPhone App

Review Cisco Networking for a $25 gift card