cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
385
Views
0
Helpful
1
Replies

Nexus 5548 core lost of static route

Hello,

 

We have noticed lately that at  each time after an electrical shutdown our  redondant Nexus 5548 lost its   static route . when verfied the route exit on the Nexus core  but without effect.

we tried to remove the static route config so many time but in vain .

Only a rebbot give effect to  the  route and make the routing works properly.

bellow  are  the config of the static route and the redistribution into ospf through a route map.

 

 

vrf context MANI
ip route 10.78.20.208/29 10.78.30.165

ip prefix-list MANI seq 20 permit 10.78.20.208/29

 

route-map  STATIC  permit 10
           match ip address prefix-list MANI 

 

router ospf 100
vrf  MANI 
router-id  1.1.1.1
redistribute  static  route-map  STATIC
log-adjacency-changes
passive-interface default

 

We are pushed at every time to reboot the nexus to get back to normal working hawever we wish if there any fix to this issue .

 

 

1 Reply 1

Reza Sharifi
Hall of Fame
Hall of Fame

Hi,

This issue most likely is related to an NS-OS bug. You should look at software caveats and fixes for your specific version and if that does not help, open a ticket with TAC and send them the info.  Most of the time, they recommend software upgrade.

HTH

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card