Hello support group,
I am trying to troubleshoot the follwing error on our Nexs5K and 7K devices.
Error on nexus5K:
2013 Oct 3 08:38:11.093 CPTORNDIS5B002 %FWM-2-STM_LIMIT_REACHED: Unicast station table dynamic capacity reached (limit 13800) - creating mac 0050.5688.3136 on port Po11 and vlan 216 disabling dynamic learn
notifications for 180 seconds or till capacity reaches 1500 entries
2013 Oct 3 08:38:13.361 CPTORNDIS5B002 %FWM-2-STM_LEARNING_RE_ENABLE: Re enabling dynamic learning on all interfaces
2013 Oct 3 08:38:14.802 CPTORNDIS5B002 %FWM-2-STM_LIMIT_REACHED: Unicast station table dynamic capacity reached (limit 13800) - creating mac 1400.8700.3800 on port Po11 and vlan 211 disabling dynamic learn
notifications for 180 seconds or till capacity reaches 1500 entries
2013 Oct 3 08:38:43.316 CPTORNDIS5B002 %FWM-2-STM_LEARNING_RE_ENABLE: Re enabling dynamic learning on all interfaces
2013 Oct 3 08:40:10.134 CPTORNDIS5B002 %FWM-2-STM_LIMIT_REACHED: Unicast station table dynamic capacity reached (limit 13800) - creating mac 3488.8700.7886 on port Po11 and vlan 211 disabling dynamic learn
notifications for 180 seconds or till capacity reaches 1500 entries
2013 Oct 3 08:43:10.212 CPTORNDIS5B002 %FWM-2-STM_LEARNING_RE_ENABLE: Re enabling dynamic learning on all interfaces
2013 Oct 3 08:44:52.534 CPTORNDIS5B002 %FWM-2-STM_LIMIT_REACHED: Unicast station table dynamic capacity reached (limit 13800) - creating mac 0475.0000.3800 on port Po11 and vlan 211 disabling dynamic learn
notifications for 180 seconds or till capacity reaches 1500 entries
2013 Oct 3 08:47:52.591 CPTORNDIS5B002 %FWM-2-STM_LEARNING_RE_ENABLE: Re enabling dynamic learning on all interfaces
2013 Oct 3 08:47:52.713 CPTORNDIS5B002 %FWM-2-STM_LIMIT_REACHED: Unicast station table dynamic capacity reached (limit 13800) - creating mac 001b.5433.f041 on port Po11 and vlan 219 disabling dynamic learn
notifications for 180 seconds or till capacity reaches 1500 entries
2013 Oct 3 08:47:54.918 CPTORNDIS5B002 %FWM-2-STM_LEARNING_RE_ENABLE: Re enabling dynamic learning on all interfaces
Error on Nexus7K:
2013 Oct 3 07:43:56.836 CPTORSCOR7K001 %L2MCAST-SLOT1-3-L2MCAST_HW_INSTALL_FAIL: Hw install failed for vlan 132 (14, 239.255.255.253, *) entry!
2013 Oct 3 07:43:56.854 CPTORSCOR7K001 %L2MCAST-SLOT2-3-L2MCAST_HW_INSTALL_FAIL: Hw install failed for vlan 132 (14, 239.255.255.253, *) entry!
2013 Oct 3 07:47:01.078 CPTORSCOR7K001 %L2MCAST-SLOT3-3-L2MCAST_HW_INSTALL_FAIL: Hw install failed for vlan 590 (69, 224.0.1.60, *) entry!
2013 Oct 3 08:04:53.063 CPTORSCOR7K001 %ARP-3-INVAL_HDR_HRD_TYPE: arp [4977] Found incorrect hardware type in ARP header: 4157
2013 Oct 3 08:23:14.499 CPTORSCOR7K001 %L2MCAST-SLOT3-3-L2MCAST_HW_INSTALL_FAIL: Hw install failed for vlan 156 (30, 239.192.0.7, *) entry!
2013 Oct 3 08:23:14.498 CPTORSCOR7K001 %L2MCAST-SLOT1-3-L2MCAST_HW_INSTALL_FAIL: Hw install failed for vlan 156 (30, 239.192.0.7, *) entry!
2013 Oct 3 08:23:14.498 CPTORSCOR7K001 %L2MCAST-SLOT2-3-L2MCAST_HW_INSTALL_FAIL: Hw install failed for vlan 156 (30, 239.192.0.7, *) entry!
2013 Oct 3 08:23:14.502 CPTORSCOR7K001 %L2MCAST-SLOT3-3-L2MCAST_HW_INSTALL_FAIL: Hw install failed for vlan 156 (30, 239.192.0.7, *) entry!
2013 Oct 3 08:23:14.501 CPTORSCOR7K001 %L2MCAST-SLOT2-3-L2MCAST_HW_INSTALL_FAIL: Hw install failed for vlan 156 (30, 239.192.0.7, *) entry!
2013 Oct 3 08:23:14.502 CPTORSCOR7K001 %L2MCAST-SLOT1-3-L2MCAST_HW_INSTALL_FAIL: Hw install failed for vlan 156 (30, 239.192.0.7, *) entry!
2013 Oct 3 08:24:19.812 CPTORSCOR7K001 %ARP-3-INVAL_HDR_HRD_TYPE: arp [4977] Found incorrect hardware type in ARP header: 23613
2013 Oct 3 08:24:58.902 CPTORSCOR7K001 %L2MCAST-SLOT2-3-L2MCAST_HW_INSTALL_FAIL: Hw install failed for vlan 156 (30, 239.192.0.207, *) entry!
2013 Oct 3 08:25:07.690 CPTORSCOR7K001 %L2MCAST-SLOT3-3-L2MCAST_HW_INSTALL_FAIL: Hw install failed for vlan 156 (30, 239.192.0.106, *) entry!
2013 Oct 3 08:26:23.934 CPTORSCOR7K001 %L2MCAST-SLOT2-3-L2MCAST_HW_INSTALL_FAIL: Hw install failed for vlan 156 (30, 239.192.0.7, *) entry!
2013 Oct 3 08:29:07.491 CPTORSCOR7K001 %L2MCAST-SLOT2-3-L2MCAST_HW_INSTALL_FAIL: Hw install failed for vlan 156 (30, 239.192.0.6, *) entry!
2013 Oct 3 08:29:07.493 CPTORSCOR7K001 %L2MCAST-SLOT3-3-L2MCAST_HW_INSTALL_FAIL: Hw install failed for vlan 156 (30, 239.192.0.6, *) entry!
2013 Oct 3 08:32:32.331 CPTORSCOR7K001 %ARP-3-INVAL_HDR_HRD_TYPE: arp [4977] Found incorrect hardware type in ARP header: 15421
2013 Oct 3 08:36:15.336 CPTORSCOR7K001 %L2MCAST-SLOT2-3-L2MCAST_HW_INSTALL_FAIL: Hw install failed for vlan 156 (30, 239.192.0.6, *) entry!
2013 Oct 3 08:36:15.336 CPTORSCOR7K001 %L2MCAST-SLOT1-3-L2MCAST_HW_INSTALL_FAIL: Hw install failed for vlan 156 (30, 239.192.0.6, *) entry!
2013 Oct 3 08:36:18.290 CPTORSCOR7K001 %L2MCAST-SLOT3-3-L2MCAST_HW_INSTALL_FAIL: Hw install failed for vlan 156 (30, 239.192.0.7, *) entry!
2013 Oct 3 08:36:18.289 CPTORSCOR7K001 %L2MCAST-SLOT1-3-L2MCAST_HW_INSTALL_FAIL: Hw install failed for vlan 156 (30, 239.192.0.7, *) entry!
2013 Oct 3 08:36:18.290 CPTORSCOR7K001 %L2MCAST-SLOT2-3-L2MCAST_HW_INSTALL_FAIL: Hw install failed for vlan 156 (30, 239.192.0.7, *) entry!
2013 Oct 3 08:36:18.292 CPTORSCOR7K001 %L2MCAST-SLOT3-3-L2MCAST_HW_INSTALL_FAIL: Hw install failed for vlan 156 (30, 239.192.0.7, *) entry!
2013 Oct 3 08:36:18.292 CPTORSCOR7K001 %L2MCAST-SLOT1-3-L2MCAST_HW_INSTALL_FAIL: Hw install failed for vlan 156 (30, 239.192.0.7, *) entry!
2013 Oct 3 08:36:18.293 CPTORSCOR7K001 %L2MCAST-SLOT2-3-L2MCAST_HW_INSTALL_FAIL: Hw install failed for vlan 156 (30, 239.192.0.7, *) entry!
2013 Oct 3 08:36:22.248 CPTORSCOR7K001 %L2MCAST-SLOT2-3-L2MCAST_HW_INSTALL_FAIL: Hw install failed for vlan 156 (30, 239.192.0.6, *) entry!
2013 Oct 3 08:36:22.248 CPTORSCOR7K001 %L2MCAST-SLOT1-3-L2MCAST_HW_INSTALL_FAIL: Hw install failed for vlan 156 (30, 239.192.0.6, *) entry!
2013 Oct 3 08:37:14.195 CPTORSCOR7K001 %ARP-3-INVAL_HDR_HRD_TYPE: arp [4977] Found incorrect hardware type in ARP header: 125
I tried to google about the error message but there isnt much expalnation on it.
Error Message FWM-2-STM_LIMIT_REACHED: [chars]
Explanation The system station table reached its capacity - no further MAC addresses could be programmed - administration intervention may be required to avoid this problem in future.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac
Any help would be really appreciated.
Thanks
