Nexus 5K Sys Log Config Assistance

[kannan.kannan]

Hi Team,

We configured sys log on Nexus 5k with UNIX  logg sever like below, We can get the logs as well.

Please check and let me know what is the uses for "logging distribute" & " logging commit"

logging event link-status default

logging distribute

logging server <Ip address > 6 use-vrf management facility local6

logging commit

no logging console

Thanks...

Regards,

Senthil

[Reza Sharifi]

Hi,

From the config guide:

To commit the pending changes to the syslog server configuration for distribution to the switches in the fabric, use the

logging commit command

To enable the distribution of the syslog server configuration to network switches using the Cisco Fabric Services (CFS) infrastructure, use the logging distribute command. To disable the distribution, use the no form of this command.

To commit the pending changes to the syslog server configuration for distribution to the switches in the fabric, use the

logging commit command

More info with examples:

http://www.cisco.com/en/US/docs/switches/datacenter/nexus5500/sw/command/reference/sysmgmt/n5500-sm_cmds_l.html#wp1428237

HTH

[kannan.kannan]

Hi,

When try to put command " no logging distribute" it showing like below error, I can't remove this config

#no logging distribute

cfs session lock active. do commit or abort