08-22-2013 08:02 AM - edited 03-07-2019 03:04 PM
Trying to upgrade my nexus from
n5000-uk9-kickstart.4.2.1.N2.1a.bin to n5000-uk9-kickstart.5.0.3.N1.1c.bin.
I'm not successfuly
xxxxxxxxr# system health check bootflash
Unmount successful...
Fixing any file system errors...failed!
Remounting bootflash ...mount: Success
Failed to mount bootflash
usctcs1-103-23rr#
xxxxxxxr# copy ftp: bootflash:
Enter source filename: n5000-uk9-kickstart.5.0.3.N1.1c.bin
Enter vrf (If no input, current vrf 'default' is considered): management
Enter hostname for the ftp server: 54.23.2.222
Enter username: Manager
Password:
local: /bootflash/n5000-uk9-kickstart.5.0.3.N1.1c.bin: Permission denied
BIOS: version 1.2.0
loader: version N/A
kickstart: version 4.2(1)N2(1a)
system: version 4.2(1)N2(1a)
power-seq: version v1.2
BIOS compile time: 06/19/08
kickstart image file is: bootflash:/n5000-uk9-kickstart.4.2.1.N2.1a.bin
kickstart compile time: 10/1/2010 11:00:00 [10/01/2010 18:32:12]
system image file is: bootflash:/n5000-uk9.4.2.1.N2.1a.bin
system compile time: 10/1/2010 11:00:00 [10/01/2010 19:48:54]
Hardware
cisco Nexus5020 Chassis ("40x10GE/Supervisor")
Intel(R) Celeron(R) M CPU with 2074284 kB of memory.
Processor Board ID JAF1411ALTQ
Device name: usctcs1-103-23rr
bootflash: 0 kB
Usage for bootflash://sup-local
95088640 bytes used
114626560 bytes free
209715200 bytes total
`show inventory`
NAME: "Chassis", DESCR: "Nexus5020 Chassis"
PID: N5K-C5020P-BF , VID: V04 , SN: SSI1352059Q
NAME: "Module 1", DESCR: "40x10GE/Supervisor"
PID: N5K-C5020P-BF , VID: V04 , SN: JAF1411ALTQ
NAME: "Module 2", DESCR: "8x1/2/4G FC Module"
PID: N5K-M1008 , VID: V01 , SN: JAF1409BDSB
NAME: "Fan 1", DESCR: "Chassis fan module"
PID: N5K-C5020-FAN , VID: N/A , SN: N/A
NAME: "Fan 2", DESCR: "Chassis fan module"
PID: N5K-C5020-FAN , VID: N/A , SN: N/A
NAME: "Fan 3", DESCR: "Chassis fan module"
PID: N5K-C5020-FAN , VID: N/A , SN: N/A
NAME: "Fan 4", DESCR: "Chassis fan module"
PID: N5K-C5020-FAN , VID: N/A , SN: N/A
NAME: "Fan 5", DESCR: "Chassis fan module"
PID: N5K-C5020-FAN , VID: N/A , SN: N/A
NAME: "Power supply 1", DESCR: "AC power supply"
PID: N5K-PAC-750W , VID: V01 , SN: DTM140401NU
NAME: "Power supply 2", DESCR: "AC power supply"
PID: N5K-PAC-750W , VID: V01 , SN: DTM140401NV
NAME: "FEX 101 CHASSIS", DESCR: "N2K-C2248TP-1GE CHASSIS"
PID: N2K-C2248TP-1GE , VID: V03 , SN: SSI144401ZJ
NAME: "FEX 101 Module 1", DESCR: "Fabric Extender Module: 48x1GE, 4x10GE Supervisor"
PID: N2K-C2248TP-1GE , VID: V03 , SN: JAF1453AGKN
NAME: "FEX 101 Fan 1", DESCR: "Fabric Extender Fan module"
PID: N2K-C2248-FAN , VID: N/A , SN: N/A
NAME: "FEX 101 Power Supply 1", DESCR: "Fabric Extender AC power supply"
PID: N2200-PAC-400W , VID: V02 , SN: LIT14360HUP
NAME: "FEX 101 Power Supply 2", DESCR: "Fabric Extender AC power supply"
PID: N2200-PAC-400W , VID: V02 , SN: LIT14360HUM
`show diagnostic result module all `
Current bootup diagnostic level: complete
Module 1: 40x10GE/Supervisor SerialNo : JAF1411ALTQ
Overall Diagnostic Result for Module 1 : PASS
Diagnostic level at card bootup: complete
Test results: (. = Pass, F = Fail, I = Incomplete,
U = Untested, A = Abort)
1) TestUSBFlash ------------------------> .
2) TestSPROM ---------------------------> .
3) TestPCIe ----------------------------> .
4) TestLED -----------------------------> .
5) TestOBFL ----------------------------> .
6) TestNVRAM ---------------------------> .
7) TestPowerSupply ---------------------> .
8) TestTemperatureSensor ---------------> .
9) TestFan -----------------------------> .
10) TestVoltage -------------------------> .
11) TestGPIO ----------------------------> .
12) TestInbandPort ----------------------> .
13) TestManagementPort ------------------> .
14) TestMemory --------------------------> .
15) TestFabricEngine :
Eth 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Port ------------------------------------------------------------
. . . . . . . . . . . . . . . . . . . .
Eth 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
Port ------------------------------------------------------------
. . . . . . . . . . . . . . . . . . . .
08-22-2013 09:33 AM
Did you try to run this command? show install all failure-reason
08-23-2013 05:36 AM
I'll try that and let you know. Thanks
08-22-2013 03:59 PM
Fixing any file system errors...failed!
Your kickstart file could be corrupt.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide