Nexus 7000 FabricPath LID

[schitrakar]

Is there a CLI command to find out LID of an interface Nexus 7000 uses in the fabric path header (OSA) ?

[Suresh Vinayagam Subramanian]

Hi,

Yes, you can check by using " show VPC " command.

Example :

switch1# show vpc

vPC status

----------------------------------------------------------------------------

id   Port   Status Consistency Reason           Active vlans  vPC+ Attribute

--   ----   ------ ----------- ------           ------------  --------------

10   Po10   up     success     success          59-94         DF: No, FP

                                                             MAC:

                                                             50.12.4513

=============>4513 is LID for vPC 10

HTH

Regards,

VS.Suresh.

*Plz rate the usefull posts.