Nexus 93240YC-FX2 Operating Mode

[AliBakry]

I am considering adding 93240YC-FX2 to my network, and I found on the installation guide that this switch can work on 12 x 40/100G ports, 16x25G , and 16x10G ports in the port side intake mode.

My question is, if I will use 12x40G ,and 10x25G , how many ports will be available to use with 1G or 10G speeds? 

[Joshqun Ismayilov]

The Cisco Nexus 93240YC-FX2 switch provides a total of 64 ports with flexible configurations.
According to the installation guide, the port distribution works as follows in port-side intake mode:

12 x 40/100G ports
16 x 25G ports
16 x 10G ports
Now, if you are using:

12 x 40G ports → This fully consumes the 12 dedicated 40/100G ports.
10 x 25G ports → This consumes 10 out of the available 16 x 25G ports.

In total, you will have 22 ports that can support 1G or 10G speeds.

Thanks,
Joshqun Ismayilov

[vishalbhandari]

@AliBakry If you configure the 93240YC-FX2 with 12 x 40G and 10 x 25G ports, the remaining ports can operate at 1G or 10G speeds. Since the switch supports a total of 32 ports, and you've used 22 ports (12 for 40G and 10 for 25G), you will have 10 ports left that can be configured for 1G or 10G speeds.