I'm having trouble performing a dynamic port breakout for a 9508, X9636PQ. I want to breakout specific ports on my blade making using native 40G and others as 4x10 ports. When I issue the command "interface breakout module 1 " I don't get the option to do a dynamic breakout. How do I get this to work?
Article:
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/interfaces/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide_7x.pdf
(config)# interface breakout module 1 ?
<CR>
Optics:
type is QSFP-40G-CR4
type is QSFP-40G-CSR4
Software
BIOS: version 08.06
NXOS: version 6.1(2)I3(4b)
BIOS compile time: 09/10/2014
NXOS image file is: bootflash:///n9000-dk9.6.1.2.I3.4b.bin
NXOS compile time: 6/30/2015 22:00:00 [07/01/2015 05:16:11]
Hardware
cisco Nexus9000 C9508 (8 Slot) Chassis ("Supervisor Module")
NAME: "Slot 1", DESCR: "36p 40G Ethernet Module"
PID: N9K-X9636PQ , VID: V01 ,
