Nexus module pairing for vPCs

[fsebera]

Hello,

Looking for the compatibility document that lists which Cisco Nexus 7k modules will work together to allow the forming of a port-channel and/or vPC port-channel.

Thanks

Frank

[Reza Sharifi · Accepted solution]

Hi Frank,

I think as long as you don't mix modules (F on one side and M on the other side) for each switch, VPC should work fine.

see figure 6-4 to 7 in this link:

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_2/nx-os/interfaces/configuration/guide/if_nxos/if_vPC.html

HTH

[fsebera]

Thank you!!

This should answer most of our questions.

Frank