I recently upgraded ios on a new Nexus N5K-C5596UP . Photo of Image attached.
However it comes starts in a boot mode showing something like this: Switch (boot)# and it will not let me start configurations.
Please help on how I can get it out of mode? so I can start configurations.
switch(boot)# show version
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2016, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
Software
kickstart: version 7.0(8)N1(1)
kickstart image file is: bootflash:/n5000-uk9-kickstart.7.0.8.N1.1.bin
kickstart compile time: 2/20/2016 21:00:00 [02/21/2016 06:32:37]
Hardware
RAM 8253860 kB
bootflash: 2007040 kB
(none) kernel uptime is 0 days 0 hour 5 minute(s) 5 second(s)
Support and Documentation
kickstart image file is: bootflash:/n5000-uk9-kickstart.7.0.8.N1.1.bin
kickstart compile time: 2/20/2016 21:00:00 [02/21/2016 06:32:37]
Hardware
RAM 8253860 kB
bootflash: 2007040 kB
(none) kernel uptime is 0 days 0 hour 5 minute(s) 5 second(s)
switch(boot)#
switch(boot)#
