Hello community,
Can anyone explain to me the bellow point :
show hardware access-list resource utilization
slot 1
=======
INSTANCE 0x0
-------------
ACL Hardware Resource Utilization (Mod 1)
----------------------------------------------------------
Used Free Percent
Utilization
-------------------------------------------------------------------
Ingress L2 QOS 240 16 93.75
Ingress L2 QOS IPv4 240 93.75
Ingress L2 QOS IPv6 0 0.00
Ingress L2 QOS MAC 0 0.00
Ingress L2 QOS ALL 0 0.00
Ingress L2 QOS OTHER 0 0.00
####################################
THEN I HAVE
####################################
INSTANCE 0x1
-------------
ACL Hardware Resource Utilization (Mod 1)
----------------------------------------------------------
Used Free Percent
Utilization
-------------------------------------------------------------------
Ingress L2 QOS 8 248 3.12
Ingress L2 QOS IPv4 8 3.12
Ingress L2 QOS IPv6 0 0.00
Ingress L2 QOS MAC 0 0.00
Ingress L2 QOS ALL 0 0.00
Ingress L2 QOS OTHER 0 0.00
What is the deference between INSTANCE 0x0 and INSTANCE 0x1 ?
and as you can see Ingress L2 QOS USed = 240 and Free = 16.
what is behind this 240 entry ? a MAC address ? a QoS applied on an interface ? what changes should be done on this switch to get L2 QOS USed = 241 and Free = 15. to better understanding,
Thank you