cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1431
Views
0
Helpful
3
Replies

Nexus1010 Did not receive supstate notification in 180 seconds. Still waiting

sokarlsson
Level 1
Level 1

After reboot due to powerfail our primary Nexus 1010 fails to boot. Output from console:

###################################################################

Auto booting bootflash:/nexus-1010-kickstart-mz.4.2.1.SP1.3.bin bootflash:/nexus-1010-mz.4.2.1.SP1.3.bin...

Booting kickstart image: bootflash:/nexus-1010-kickstart-mz.4.2.1.SP1.3.bin................................................................Image verification

OK

Starting kernel...

PCI: PIIX3: Enabling Passiv%H+¬)6%è¹

                                     ƒ00ñ.¬©íUsage: init 0123456SsQqAaBbCcUu

mkdir: cannot create directory `/new-root/old-root': File exists

INIT: version 2.85 booting

Bootflash device is /dev/hda

Checking all filesystems....r. done.

Setting kernel variables: sysctlnet.ipv4.ip_forward = 0

net.ipv4.ip_default_ttl = 64

net.ipv4.ip_no_pmtu_disc = 1

.

/etc/rc.d/rcS.d/S35iptables: line 41: //iptables: No such file or directory

/etc/rc.d/rcS.d/S35iptables: line 44: //ip6tables: No such file or directory

Loading system software

Uncompressing system image: bootflash:/nexus-1010-mz.4.2.1.SP1.3.bin

Load plugins that defined in image conf: /isan/plugin_img/img.conf

load_plugin: failed read swid map from "/mnt/pss/plugin_swid_map" with rc 0xffffffff. Plugin will be assigned new ID

Loading plugin 0: core_plugin...

load_plugin: Can't get exclude list from /isan/plugin/0/boot/etc/plugin_exclude.conf (rc 0x40ea0017)

plugin_link_to_exec_path: plugin_path = /isan/plugin/0, tar_log = /isan/plugin_extract_log/0

num srgs 1

0: swid-core-sup1sfp, swid-core-sup1sfp

num srgs 1

0: swid-sup1sfp-ks, swid-sup1sfp-ks

INIT: Entering runlevel: 3

Starting dhcpd daemon: dhcpdInternet Systems Consortium DHCP Server V3.0.1rc14

Copyright 2004 Internet Systems Consortium.

All rights reserved.

For info, please visit http://www.isc.org/sw/dhcp/

Wrote 0 deleted host decls to leases file.

Wrote 0 new dynamic host decls to leases file.

Wrote 0 leases to leases file.

Not configured to listen on any interfaces!

.

Exporting directories for NFS kernel daemon...done.

Starting NFS kernel daemon:rpc.nfsd.

rpc.mountddone.

/bin/mkdir: cannot create directory `/bootflash/repository': File exists

/isan/bin/mount_cppa_repository exist

2012 Feb 15 13:11:59 NTM-DC-VSA-01 %SYSLOG-2-SYSTEM_MSG: Did not receive supstate notification in 180 seconds. Still waiting

###############################################################################

Last message "%SYSLOG-2-SYSTEM_MSG: Did not receive supstate notification in 180 seconds. Still waiting "

Repeats 5-6 time every 180 seconds and then the appliance restarts by itself.

Do I need to reinstall?

3 Replies 3

sokarlsson
Level 1
Level 1

If anyone runs into this. I had to reinstall the Nexus 1010 software to resolve this.

Does anybody has another answer, because i have reinstalled it but i continue with this issue?????

SOKARLSSON, what number of version did you install??

Thanks !!!!

At that time I just reinstalled the primary with 4.2(1)SP1(3). Have you reinstalled from the ISO removing ALL config from the node that is not syncronizing?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card