NM-16ESW Solution

[jeff.carr]

Need to find out if this solution will work.

I want to install a NM-16ESW into a 2811 ISR. I would like to configure 16 individual VLAN interfaces and assign each physical port to one of the VLANs.

Will the router/module support that number of VLANs? Each VLAN interface will have it's own IP address in a separate network. Will I be able to successfully route between all of the different subnets using EIGRP?

Thanks.

[Edison Ortiz · Accepted solution]

You can configure up to 256 Vlans. Your proposed design will work.

HTH,

__

Edison.

[jeff.carr]

Acknowledged. Thanks for the reply.